EN
▼
RU
UZ- EN
Courses for laboratories · ISO/IEC 17025 · ISO 9001 · ISO 19011 · Uzbekistan
Training and professional development for laboratories and enterprises
Practical format: training is built not only around standard requirements, but also around real laboratory tasks: documents, records, test reports, methods, personnel, audits and inspection readiness.
Standart Consult provides corporate training for laboratory managers, quality managers, QMS specialists, engineers, metrologists and internal auditors. Key areas include ISO/IEC 17025, O‘z DSt 3410:2019, ISO 9001, ISO 19011, method validation and verification, evaluation of measurement uncertainty, metrological traceability and internal laboratory quality control.
ISO/IEC 17025
ISO 9001 and ISO 19011
Validation and verification
Measurement uncertainty
Internal audit
Who the training is for
Courses tailored to real laboratory and enterprise tasks
17025laboratories preparing for accreditation
3410laboratories preparing for approval
9001quality departments
19011internal auditors
Popular programs
What laboratories most often request
1
ISO/IEC 17025 for laboratories
Standard requirements, management system structure, technical records, personnel competence, equipment, traceability and ensuring the validity of results.
2
Uncertainty + verification
Practice in calculating uncertainty, uncertainty budgets, confirmation of method suitability, record keeping and linkage with test reports.
3
Laboratory internal audit
Audit plan, checklists, interviews, collection of objective evidence, reporting nonconformities, corrective actions and management review.
4
QMS ISO 9001 + ISO 19011
Process approach, risk management, QMS documentation, internal audit, reporting, nonconformity management and quality system improvement.
Course catalog
Professional development courses
Laboratories
QMS
Metrology
Internal audit
Conformity assessment
ISO/IEC 17025
Competence assessment of testing and calibration laboratories under O‘z DSt ISO/IEC 17025:2019
A course for laboratories that implement, maintain or prepare a management system for accreditation.
- structure of ISO/IEC 17025 requirements;
- technical and management processes;
- records, reports and evidence of competence.
17025 audit
Internal audit of testing and calibration laboratories under O‘z DSt ISO/IEC 17025:2019
A practical course for personnel who plan and conduct internal audits of the laboratory management system.
- audit program and plan;
- ISO/IEC 17025 checklists;
- nonconformities and corrective actions.
O‘z DSt 3410
General requirements for technical competence of testing laboratories under O‘z DSt 3410:2019
A course for production, departmental and approval-seeking laboratories that need to understand technical competence requirements.
- personnel, premises and equipment;
- scope of work and methods;
- logs, reports and technical records.
Uncertainty
Evaluation of measurement uncertainty — general course
A basic course for understanding error, uncertainty, influence factors and rules for presenting results.
- terms and main approaches;
- sources of uncertainty;
- expanded uncertainty in reports.
Practice
Evaluation of measurement uncertainty — practical course
Practical review of calculations, uncertainty budgets and records based on real laboratory methods.
- uncertainty budget;
- method-based calculations;
- presenting results in a report.
Methods
Validation and verification of testing and measurement methods — general course
The course explains how to confirm method suitability, when validation is required and when verification is sufficient.
- validation, verification and scope of application;
- method suitability criteria;
- documenting results.
Methods
Validation and verification of testing and measurement methods — practical course
A practical program for laboratories that need to document confirmation of the suitability of applied methods.
- verification/validation plan;
- reports and record forms;
- analysis of results and decision making.
Traceability
Ensuring metrological traceability in testing laboratories
The course helps establish the link between measurement results and verification, calibration, standards, reference materials and equipment.
- traceability chain;
- verification, calibration and records;
- requirements for measuring instruments.
Risks
Risk management in testing laboratories
A course for implementing risk-based thinking in laboratory processes and the management system.
- identification of risks and opportunities;
- risk management actions;
- linking risks to laboratory processes.
Internal QC
Internal laboratory quality control of measurement results
A course for laboratories that need to organize control of result stability, acceptability and validity.
- operational control of the analysis procedure;
- control of result stability;
- control charts and acceptance criteria.
ISO 9001
Quality management systems under O‘z DSt ISO 9001:2015
A course for enterprises, quality departments and laboratories that implement or maintain a quality management system.
- process approach;
- QMS documents and records;
- management of nonconformities and improvements.
ISO 19011
Internal auditor of management systems under ISO 19011
A practical course on planning and conducting internal audits of quality, environmental, occupational health and safety, and laboratory QMS management systems.
- audit principles;
- plan, checklist and interview;
- auditor report and nonconformities.
Quality manager
Quality manager and internal auditor of management systems
A comprehensive program for specialists responsible for documentation, processes, internal audits and QMS improvement.
- quality manager responsibilities;
- document and record control;
- analysis, audit and corrective actions.
Metrology
Metrological support of production
A course for metrologists, engineers and responsible personnel who organize measurement and equipment-related work at an enterprise.
- metrological documentation;
- verification, calibration and schedules;
- control of measuring equipment.
Uniformity of measurements
Fundamentals of ensuring the uniformity of measurements
A basic course on the legal, regulatory and practical foundations of ensuring the uniformity of measurements.
- state regulation;
- measuring instruments and characteristics;
- measurement methods and confirmation of results.
Verification/calibration
Verification and calibration of measuring instruments
The course can be adapted by measurement type: electrical, thermal, geometric, mass, volume, pressure, flow and physico-chemical measurements.
- organization of verification and calibration;
- methods and presentation of results;
- schedules and equipment requirements.
Conformity assessment
Legal and regulatory foundations of conformity assessment
A course for laboratory and enterprise personnel who need to understand conformity assessment procedures, document requirements and participant responsibilities.
- conformity assessment and laboratories;
- reporting requirements;
- documents, records and evidence base.
Certification
Product certification and inspection control
A course for specialists involved in product conformity confirmation, inspection control and document preparation.
- certification basics;
- inspection control;
- presentation of results and schedules.
Testing
Product testing by industry
A course on organizing product testing with consideration of methods, equipment, reports and conformity confirmation.
- organization of testing;
- methods and technical records;
- link between testing and certification.
ISO 14001
Environmental management systems under O‘z DSt ISO 14001:2019
A course for environmental departments, enterprise specialists and internal auditors in environmental management.
- environmental policy and objectives;
- EMS processes and documents;
- ISO 14001 internal audit.
ISO 45001
Occupational health and safety management systems under O‘z DSt ISO 45001:2020
A course for those responsible for occupational safety, industrial safety and implementation of an OH&S management system.
- occupational safety risks and processes;
- documents and responsibilities;
- inspections and system improvement.
ISO 22000
Food safety management systems under O‘z DSt ISO 22000:2019
A course for food enterprises, laboratories and specialists involved in food safety and HACCP.
- food safety;
- management system documents;
- internal audit and control.
ISO 37001
Anti-bribery management systems under O‘z DSt ISO 37001:2019
A course for compliance specialists, managers, procurement departments and persons responsible for an anti-corruption system.
- anti-corruption policy;
- risk assessment;
- control and internal procedures.
ISO 50001
Energy management systems under O‘z DSt ISO 50001:2019
A course for chief power engineers, engineers, energy managers and energy efficiency specialists.
- energy consumption and indicators;
- energy policy and objectives;
- actions to improve energy efficiency.
Training format
How training is delivered at Standart Consult
1
We define the task
We clarify the laboratory type, scope of testing, current document system and training objective: accreditation, approval, audit, inspection or personnel development.
2
We adapt the program
We select topics, examples and practical tasks for your laboratory or enterprise so that the training is connected with real work.
3
We conduct the course
We review standard requirements, documents, checklists, records, typical nonconformities and practical expert questions.
4
We consolidate the result
After training, we can prepare testing, a training record, a program, a list of participants and supporting documents for the internal archive.
Why it matters
Training helps cover not only the “paperwork”, but also practical readiness
During accreditation, approval or audit, experts assess more than the existence of documents. Personnel must understand their responsibilities, explain the method, show records, link equipment to results and respond correctly to nonconformities.
That is why Standart Consult programs are built as practical training for real laboratory work: standard → procedure → record → report → expert question.
QMS documents
technical records
reports
methods
audit checklists
corrective actions
After the course, personnel better understand:
- which requirements apply specifically to their processes;
- how to maintain logs, forms, reports and technical records;
- how to explain the testing procedure to an expert;
- how to distinguish a nonconformity, corrective action and improvement;
- how to use standard requirements in daily work.
FAQ
Frequently asked questions about training
Key areas include ISO/IEC 17025, O‘z DSt 3410:2019, laboratory internal audit, method validation and verification, evaluation of measurement uncertainty, metrological traceability, risk management and internal laboratory quality control.
Yes. The corporate format is convenient when personnel of one laboratory or enterprise need to be trained using their own examples, documents, scope of testing and typical nonconformities.
Yes. For preparation for accreditation, courses on ISO/IEC 17025, internal audit, uncertainty, method verification, metrological traceability, risk management and internal laboratory control are especially useful.
Yes. For enterprises and laboratories, training can be delivered on ISO 9001, ISO 19011, internal audit of management systems, document control, the process approach and corrective actions.
Yes. For example, laboratories often combine ISO/IEC 17025 + uncertainty + method verification, while enterprises often combine ISO 9001 + ISO 19011 + internal audit.
Do you need to train laboratory or quality department personnel?
Submit a request — we will select a program for your laboratory, scope of work, personnel level and training objective.
Let’s talk
Have a question? Let’s discuss it
Thank you for your request. Our consulting team will review it and contact you shortly.
